OBD2 2.0L ABA
STAGE 1 EPROM
Stage 1 EPROM combined with Bosch 30# injectors is all you need for a plug'n play solution capable of 250hp.
With C2's stage 1 EPROM, you are able to run your stock MAF, stock compression, and stock fuel pump.
STAGE 2 EPROM
Combined with Bosch 42# injectors and 70mm MAF, these options are also plug and play capable of running 300hp.
With the C2Motorsports stage 2 EPROM, consider lowering the compression and adding an inline pump when running more than 10psi.
C2Motorsports would like to offer a complete tuning package for your Turbo project. Our fueling kit includes everything that you need for complete Plug'n Play engine management in one convenient package
- C2 Turbo Software
- Stage required injectors
- Air Filter
- Silicone Couplers
- SS Clamps
- Billet 70mm MAF housing (For Stage 2)
This a performance EPROM that retains 100% of your cars emissions equipment. You must not alter the factory emissions in order to use this software or you will get a Check Engine Light (CEL).
This a performance EPROM that allows for the addition of an aftermarket exhaust.
This performance EPROM is designed for OFFROAD or TRACK-ONLY use, and will allow for the removal of the SAI(secondary air injection), CAT and 2nd O2 sensor.
**DISCLAIMER: This FLASH to be used on cars retaining factory compliance to all federal emissions standards. C2Motorsports is not responsible for the misuse of this product.
**SETUP DISCLAIMER: For the MAF-based system you will need to use a DV recirculated. Cannot use a BOV to atmosphere